Jump to content
HybridZ

JTR Lower Radiator Bracket Dimensions


Ruben

Recommended Posts

Can someone that has a JTR lower radiator bracket be willing to measure their bracket. I need to know the total width of the bracket and the distance between the top of the side flanges and the bottom of the bracket. Would like to see if I can use the JTR bracket with my new aluminum radiator.

 

Thanks,

 

Ruben

'72 240Z

Link to comment
Share on other sites

Guest RisqueRace?

Hi Rueben,

 

I just put my JTR radiator support in. I'll give you some measures, but I am not completly clear on what you are asking.

 

Here goes I'll start with the big dimensions and go to small.

overall width including mount flanges 28 7/8

width of internal dimension where rad sits 26 3/16

total height including support tube 2 3/8 (od)

depth of saddle where rad sits 1 3/4

 

center measures of header flange saddle braces from one side ( these are offset cause of one tank being bigger than the other for automatic trans cooler applications) 3 1/4 and 2ft 1/2

 

width of the header flange saddle braces (id) 3 1/4

 

Hope this helps, It works perfect for my custom Al radiator

 

Bruce

Link to comment
Share on other sites

Ruben, be sure you measure the height of your radiator first. I used the Camaro/V6 Van radiator (the one JTR says to use) and the JTR bracket located my rad 3/8" too high. It hit the hood! :x Just a heads up.

 

Also, remember to measure with the cap ON. Mine actually cleared the hood without the cap.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...