ihatejoefitz Posted April 21, 2005 Share Posted April 21, 2005 this is how i wired my injectors injector 12V -> splice -> resistor -> injector1 ...........................|-> resistor -> injector2 injector 12V -> splice -> resistor -> injector3 ...........................|-> resistor -> injector4 injector 12V -> splice -> resistor -> injector5 ...........................|-> resistor -> injector6 the other side of the injector i wired injctor 1 to the odd numbered injectors and injector 2 to the even. sound okay? thanks for the help. Quote Link to comment Share on other sites More sharing options...
jkube Posted April 22, 2005 Share Posted April 22, 2005 You didnt mention if you have MS or MSS, but I'm sure you dont have the wiring correct. I am using MS and have the the injectors connected so that cylinders 1, 2, 3 are on one splice and 4,5,6 are on another. This allows a setup for "alternating" injection. http://www.execulink.com/~jkube/Mainpage_lethalzs.html Quote Link to comment Share on other sites More sharing options...
Tony D Posted April 22, 2005 Share Posted April 22, 2005 I will go with Jkube on that one let me try this: 12V+ ----- Resistor Pack-----Inj1+ Inj1(-)----- 12V+ ----- Resistor Pack -----Inj2+ Inj2(-)-----SPLICE -----INJ1(Gnd for Injectors thru MS) 12V+ ----- Resistor Pack-----Inj3+ Inj3(-)-----/ 12V+ ----- Resistor Pack -----Inj4+ Inj4(-)----- 12V+ ----- Resistor Pack -----Inj5+ Inj5(-)-----SPLICE -----INJ2(Gnd for Injectors thru MS) 12V+ ----- Resistor Pack -----Inj6+ Inj6(-)-----/ Basically I have one common 12V+ lead to the resistor package, a stock unit from an 81N/A ZX, and then the grouping of the leads for the ground through the MS is what is important. You can run this setup in either simultaneous, or alternating. I found better results while idling using alternatings two squirts per cycle... The way you have it wired (if I understand what is there) will not have correct resistance, and is running injectors in series, which is not the way you should do it from what I understand. I hope this looks better now that I edited it! LOL Quote Link to comment Share on other sites More sharing options...
evildky Posted April 23, 2005 Share Posted April 23, 2005 I wired mine with the evens and odds it runs great no issues at all, and it sounds like he has 4 injectors powered on one fuse circuit and 2 on the other, I fed 3 off each of the 2 circuits , each of the two 12v circuits has 2 lugs I used only one lug from each circuit to power the injecors Quote Link to comment Share on other sites More sharing options...
ihatejoefitz Posted April 23, 2005 Author Share Posted April 23, 2005 green block = relay board orange = "inj 1" yellow = "inj 2" grey block = resistors black block = injectors red = "inj 12v" so you guys are saying that the yellow wires need to go to injectors 123 and the orange wires need to go to injectors 456? Quote Link to comment Share on other sites More sharing options...
evildky Posted April 25, 2005 Share Posted April 25, 2005 green block = relay board orange = "inj 1" yellow = "inj 2" grey block = resistors black block = injectors red = "inj 12v" so you guys are saying that the yellow wires need to go to injectors 123 and the orange wires need to go to injectors 456? yes thats the popular way to run it, I however hast he orange/yellow wires run as in your schematic with no priblems at all, in a batch fire the 2 banks don't seem to really ba any better than one batch? and I'd seperate your power to 3 on each of the 12 circuits you have 2 on 1 and 4 on the other Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.