Tyris825 Posted January 29, 2020 Share Posted January 29, 2020 On 1/24/2006 at 10:54 AM, Turbo280Z said: what do u think would be the possible most to bore it out? i was messin around with the engine make thing and if the numbers fit like that says it does it would be like $5500 for a all forged bottom end all custom sized. and i figured out to make a 3.6L with the l28 block. so here are my questions.. 1. what is the most u can bore? 2. whats the biggest possible stroke for the crank? 3. what is the minimum pin height that can eb used? heres what im hoping i can do.... 91 bore 92 stroke 139 rods flat top piston with 21 pin height 2mm HG p90 head if it fits it works out to be 3.590L CR 8.55 any input would be great guys thanks..... and a huge turbo 3.6 240z would be SO FAST lol I’m not a very experienced person, but I see a few problems here, first of all people are already risking it with 3 mm over bore, and 133mm rods barely fit without clearancing the block, but I could be incorrect, but the biggest stroker I’ve heard of is a 3.2 with a 91mm bore, and I’m not quite sure of the rod length. feel free to correct me if I’m wrong Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.