Oldestzguy Posted December 6, 2006 Share Posted December 6, 2006 http://www.johnscars.com/zcar/zcar.html I tried searching but did not find this. Does anyone know about this kit. Is it just a JTR kit as he does Jaguars also? Quote Link to comment Share on other sites More sharing options...
COZY Z COLE Posted December 6, 2006 Share Posted December 6, 2006 If you have not read this thread on swap kits, this is a good read... http://forums.hybridz.org/showthread.php?t=116585 LARRY Quote Link to comment Share on other sites More sharing options...
EvilC Posted December 6, 2006 Share Posted December 6, 2006 If you have not read this thread on swap kits, this is a good read... http://forums.hybridz.org/showthread.php?t=116585 LARRY I just went on the link he provided and I do not see any kits of LSx motors anymore, just for LT1's. Quote Link to comment Share on other sites More sharing options...
Oldestzguy Posted December 6, 2006 Author Share Posted December 6, 2006 That is a good thread and good reading, however I am still confused, is this John guy buying JTR kits and selling them as a distributor and installer or is his kit different? Quote Link to comment Share on other sites More sharing options...
Bartman Posted December 6, 2006 Share Posted December 6, 2006 Johns has both regular SBC kits (including LT1) and LSX kits. Here's a thread that discusses the regular SBC kit. http://forums.hybridz.org/showthread.php?t=112384 It is definitely different than the JTR setup. SBC kit http://www.johnscars.com/zcar/zcar.html LS1 kit http://www.brokenkitty.com/zcar/zcar.htm Quote Link to comment Share on other sites More sharing options...
Oldestzguy Posted December 6, 2006 Author Share Posted December 6, 2006 Perfect Bartman, thanks. Quote Link to comment Share on other sites More sharing options...
EvilC Posted December 6, 2006 Share Posted December 6, 2006 Yeah thanks.....I didn't know they had two sites...lol Quote Link to comment Share on other sites More sharing options...
dat240zg Posted December 7, 2006 Share Posted December 7, 2006 OldestZguy: If you're interested, I still have pics of the JCR LT1 kit in my gallery. I ended up using the JCR T56 mount but not the engine mounts. The end result was that the motor was placed in between the location of the JTR and the Scarab locations. When used with the T56, the shifter came out too far forward - under the front of the dash. I'll be selling my engine mounts and some of the misc pieces here in the next few weeks. One thing to say for the JCR kit, it's a nice piece of work! Everything fits very nicely and doesn't have to be pieced together. The JCR manual leaves a lot to be desired. Overly brief and vague - not a good first timer. I had to re-read the JTR manual before I could figure out the JCR instructions. But that may be just me.... Bryan Dat240zg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.