FJ 280z Posted January 20, 2008 Share Posted January 20, 2008 hey guys, i just got a question maybe someone on here can help me out with. im doing the msns-e on a ms1 v2.2 board, with a relay board and im using an MSD 6AL box. anyways, im using the fidle to trigger spark, from moby's sticky i know i have to do the pull-up resistors, and also remove the fidle relay and jumper some connections. does anyone have a pic of thier jumpered fidle relay on the relay board? just so i know what pins to jumper. also, has anyone used the pull-up resistor between pin1 and pin 4 of the socket? just curious if anyone has a pic of that too. im getting close to understanding this whole msns-e thing. so i may have more questions later if things don't work, (no fuel, sparky, etc...lol) thanks for your help Quote Link to comment Share on other sites More sharing options...
FJ 280z Posted January 21, 2008 Author Share Posted January 21, 2008 okay, maybe too many questions...anyways, does anyone have a pic of how they jumpered thier fidle relay on the megasquirt relay board? this is required right in order to use msns-e? Quote Link to comment Share on other sites More sharing options...
ihatejoefitz Posted January 21, 2008 Share Posted January 21, 2008 Like this? source: http://www.diyautotune.com/catalog/pcbv3-valve-control-tip120-modkit-p-134.html Quote Link to comment Share on other sites More sharing options...
FJ 280z Posted January 21, 2008 Author Share Posted January 21, 2008 yeah, that was it, thank you.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.