Jump to content
HybridZ

alternator


Recommended Posts

I have been told by people that make harnesses that you need 12 volts to the " L" terminal on the alternator but you must put some resistance in line so as not short it out. This 12 volts will "excite" alternator and turn it on. Keep It clean guys. 350 OHM 1/2 watt resister is what I was told to use, Available at Radio Shack I believe. The 12v should be keyed

Link to comment
Share on other sites

i put the resistor in and it started charging , but by the time i went to check the voltage it stopped charging.i tried it 3 diffrent wires with the same results ,so do you guys think i should replace the alternator or rebuild it or what next?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...