Jump to content
HybridZ

my diff question


mikesv8z

Recommended Posts

What has been done successfully is to either fabricate spacers to eliminate the extra tolerance when using 10mm in a carrier designed for 12mm bolts. I may be wrong but, I think your 8mm bolts are actually 10mm. When I installed my Precision Gear LSD unit, I encountered the same question you have asked! Precision Gear's advise was to fab spacers or not. If no spacers are to be used, besure to rotate the ring-gear in the direction it would naturally take when loaded. Be sure to use lok-tite and the proper torque on the ring-gear bolts. There is a write up on this subject in the archives....just search.

 

Tom

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...