Jump to content
HybridZ

Aero with no inner fenders


Recommended Posts

On that statement of having pressures equal behind the radiator and in front of it...the fan will then impart flow. Equal pressures only need flow imparted to them to move air from one side to another.

The reason they are overheating is usually poor or little attention paid to the cooling system.

 

If this was a truisim, the L6 would exhibit the exact same characteristics.

 

Many S30 racers, where allowed cut one or two 3" diameter holes in the fenderwells to exit behind the tire (like JC mentions in his rolling donut analogy) on each side. It not only exhausts the engine bay more efficiently, you will notice the FRP hood does not bow out 1" above the strut towers at 100mph any more...

Link to comment
Share on other sites

 

If this was a truisim, the L6 would exhibit the exact same characteristics.

 

..

 

yeah, you're probably right. if it were a problem the straight 6's would have had vapor lock problems, overheat, and wander at high speed........

 

to be fair, the 6's have a fair amount of spare room through the tunnel the v8 jtr's don't.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...