Jump to content
HybridZ

Compatible? Techno Tension Control Rods with Johns car Ls1 mount kit?


Recommended Posts

Has any one used Techno Toy Tuning tie rods on an s30 with Johns car LS1 kit? I was looking at the pictures on the control arm and im wondering if theres enough thread on the back side of the rod to fit the motor mount through it still.

 

I want to change the stock ones for two reasons:

 

1- I need the adjustablity

2- They are snapping left and right with poly bushings anyway. ( And i really dont want a tie rod to fail while holding up my ls).

Has anyone used both the TTT Tension Control Rods and Johns ls1 kit together is what im asking basically.

Link to comment
Share on other sites

Check through the t/c rod threads . I dont remember exactly which thread but there is a problem using urethane bushings in place of the originals at the rear of the t/c rod. The fix was to use a rubber bushing on the front of the bracket. Urethane does not have enough compression to absorb the road forces into the rod and bracket.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...