Jump to content
HybridZ

Running a Z with no rear sway bar


Recommended Posts

I have a custom driveshaft and a stock sway bar. My driveshaft is hitting my sway bar under hard acceleration or downshifting. So I pulled out the sway bar and the knocking went away. My question is what can expect while running the car with the rear sway bar? Has anyone done this for an extended period of time?

Link to comment
Share on other sites

Thanks guys. I ran it on the street with no issues so I think I'll leave it off for now. I did a search and found out that the Suspension Technique rear sway bars are routed differently and thus eliminate the problem I was having.

Link to comment
Share on other sites

When I purchased my 280z it had large aftermarket front and rear sway bars. I took the rear one off and it handled better for autocross. I ran it like that for about a year. I do believe it handles better now with a large front one and stock rear, however you should be fine.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...