Jump to content

240Z Stock Fuel Pump Wire

Recommended Posts

On one end of this harness in the car is a green wire and a black with white stripe wire that was in a plastic t-connector plug. The green is the +12 on the pump and the black and white (now I think I figured it out) goes to the ignition.


The question is those that are using the stock wiring and SDS EM4-6F with a relay; are you using the green wire on the stock harness to go to #87 on the relay? Also on the SDS fuel pump relay diagram there are (2) +12v key sources do I use the black/white wire to one of those two or snip it?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...