bluez
-
Posts
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by bluez
-
-
Looking for mn47 head.
-
hey thanks i did it wrong, you are right the pin height is 30.5 and i check out other piston to see if it would work and the closes was a b16a turbo piston, the pin diameter 21mm and the height 30.99 or 1.185 and size is 81mm what you think thanks.
-
hey guys thanks, the reason i ask rb24 or rb23- they keep on mention 4agze piston with 20mm pin height. so if i add it rods 121.5+stroke 36.85 or 73.7/2+20mm pin height =178.35 so it would be 188.35-178.35=-10 does this make sense or i am doing it wrong.
-
hey guys i have been looking for infor on the rb20/25/26 block height can't find it. Any one knows the height of these blocks thanks.
-
hey i think if someone wants to stretch their tires let it be,we are all car guys and to put a person down about their tastes and what they like is not right. the car scene has never stop changing but some of us has stop, in the eyes of few change is ugly because they don't understand, just let things be and enjoy the happiness cars bring in our life.
-
15x10.5 works equip 3 wheels , getting ready to paint in few days, doing the final body work
-
thanks zforce i do have a n42 block but i really would like to know what is the l24 limit but thanks.
-
hello,everyone my question is has anyone ever heard of an l24 block getting bored out to fit 87mm piston. I know that it is a huge bore but i can't find any thread with that information and if it could be done. I look at the stroker motor and they are boring their's to 89mm all the way to 91mm so why a l24 can't be bored out.thanks
-
hey it's stretched, but not as that bad i have seen guys in japan run 225/60/15 on 12" wheels and in europe well that's a hole different sorry.
-
hello. these are my wheels hoping to finish my z this year.Works 15*8 -25 offset running 195/55/15 and 15*10.5 -6 running 225/50/15 thanks.
-
thanks blueovalz,just wanted to know by the way,what kind of backspace do you run and offset because it looks like you run a really deep dish thanks.
-
hello,knowing the set up of the s30 wheels from stock being 6 to 6.5" wide and 14 inch.I see many guys running larger wheels from 16's to 18's from all the 7" wide to 12", my question could the suspension take these wheels,or would you have to changed ball joint bearing etc more often.Now just say you are running 17*9 in the front and 17*11 rear and with a very low offset,say 3.5 backspace what kind of stress would that be on your suspension and how would you be able to alleviate this.thanks
-
hey guy i went by show car about a month ago,he does have the molds for quater 3" imsa flares and a 4' inch flares.the only thing his molds are out side,so you never know what you are geting.I bought the 3" quaters from him but one side had a bit of dip so you would have to fill it,and it is better if you know a person who live in toronto so they could always check up on him,so there is no delay on your order because it seem sometimes he is not all there.
-
i guess that is true when it comes to wheels you would not notice that much of differents.the reason was that boze alloy had some great wheel.17*8 and 17*11 for 1850.00 custom made offset to what ever you want.i just bought works equip 3 wheels 15*8 and 15*10.5,the only problem tires for the 10.5 wheel not to much choice but i went to 17 inch wheel there alot of choices.
-
hey guy i have a question.if you are running your z car with few mods do you think it would be wise to go with a 17 inch rim because there are more to choose from with rim and tire combo but it adds bit of weight,so it would bring your performance down just a bit.so would you notice a big change from running 15's or 16's and go up to 17's thanks.
-
hello, thanks i wil try that number again.
-
hello, guys does any one know if this company still open,i tried to call and email with no response.zfiberglass had very nice products what i have seen on there site thanks.
-
hey i feeling a bit better that i was not the only one with this problem.i tryed to mount the bumper today,it seemed that one side can reach the fender to fit in and where the head light bucket does not fit at all.i will try another fender and see what happen.
-
hey so it fits the 240z,i dont know what to do it could be the fiberglass fender got twisted that the only thing i could think of i will try again tomorrow thanks.
-
hey try this with out the bumper but i dont know if you cah see the differents on the passenger side.file:///Users/Berns/Pictures/iPhoto%20Library/Originals/2007/Roll%2015/DSC00521.JPG try
-
no, but i will try to get one
-
hey guys i bought msa type 3 air dam and finding it impossible to fit on my fenders.my car is a 1977 but i had fiberglass fenders from a early year could be the 240z 1972 or so. i didn't think the fenders would be that different but it seem to be short it fit only on one side then the other side the air dam is not even close,did any one else every have this problem with the type 3 msa front air dam.
-
hey,i did order the right wheel,but the person who took the order wrote it down wrong .so today will give him a call and fix it.thanks guys
-
hey,yes i am talking about the s30.i order a set of wheels but instead of geting 15/8 front -25 and 15/10.5 rears -6.i got 15/9 -25 and 15/11.5 6 i am not sure have to double check.i just wanted to see if i could used them.the rear if i used a half inch spacer.it would be 5.5 backspace which i think could work not sure.the front is ok.
Wheel Show! Post your pics of you wheels
in Brakes, Wheels, Suspension and Chassis
Posted
These are my wheels, forgive me still in the process making steel flares or buying fiberglass one's
Ronal Racing wheels
Old tires set up;
15x11 225/50/15 tires
15x13 265/50/15 tires
new set up when finish i will post it
15x11 250/50/15
15x13 225/50/15