CHEQUERED FLAG JOE
-
Posts
44 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by CHEQUERED FLAG JOE
-
-
On 1/27/2018 at 2:03 PM, JMortensen said:
Are those the billet chromoly ones, Joe? I'm betting Richard wants to know more about them.
Hi Jon, yes the same ones I have been selling.
Z31 HALF SHAFTS
Z 31 half shafts are designed to allow you to install the Z31 CV into your 1970-1978 Z car. They are made out of 4340, heat treated and black zinc coated. They are the correct size so no need to flip your CV cages. That doesn't get you the correct amount of spacing.
-
On 1/25/2018 at 11:06 PM, 260DET said:
Z31 axle specs? Are these new, reco's?
All parts are new with the exception of the used Z31axle assemblies.
Joe
-
Hi Guys, there is big differances with CVs. If parts wern't heat treated they would self destruct in no time. My kit is priced the way it is as I only use good quality parts.
This is the CVs I use in my kit.
http://www.rcvperformance.com/product-details.aspx?sku=301174M-28M
As you can see they are $265.00 each that's almost a 1/3 of the cost of my kit.
http://www.modern-motorsports.com/datsun-240z-280z-complete-cv-axle-conversion.html
Joe
- 1
-
Hi Guys, forgot to mention I have kits fpr the S30 to convert to twin brake master cyl with balance bar in stock.
Thanks Joe
-
Hi Guys, just want to let you know I have.
Stub Axles both 27 and 39 spline in stock.
Z31 flanges both 27 and 39 are in stock.
Used Z31 axles assemblies in stock.
Correct length Z31 1/2 shafts in stock.
Also my 930 CV conversion kit will be in stock soon.
Waiting on one part to complete my conversion kit.
Thanks Joe
-
Jim, if I can help let me know.
Joe
-
I have them in stock.
Joe
-
I have them in stock.
Give me a call.
Joe
-
So sorry if I offended anyone with my input.
Good Luck
Happy Holidays
Joe
-
Joe,
I wanted state that I'm certain your parts and business are of good quality. My starting this thread was done absent maliciousness or intent to undermine you or your business, but simply to share knowledge with the community and start a discussion.
We are good.
Happy Holidays
Joe
-
Buy JOE's stuff-done.
Thanks
Happy Holidays
Joe
-
You're missing or ignoring the point. Buy a car somebody else built. Let someone else drive it and win races. Buy a video game with cars in it. People are just discussing possibilities and learning a little on the side.
Beside that MMM products almost disappeared when MMM went out of business, and Joe needs an order of four to make a new run. What does a person do in the meantime? what if Joe goes out of business?
Joe, you should put the need for four orders on your web site. And there's competition now that doesn't seem to need four. Just saying, communication is important.
NewZed, there is one source making the parts.
The other places are in the same boat they need to order 10 parts at a time.
In fact they both have bought from me. I spoke to one of the guys in Canada 4 months ago nice guy forgot his name and have an email from Ryan in Oct looking for parts.
If it can be done cheaper that's great Ill join in.
The old days of ordering parts is gone. The manufacture would make and keep the parts in stock. I could order 2 parts at a time. Heck they even dropped shipped for me.
Now I have to order 10 parts per item number and wait till the last one sells to make a profit. These are parts for vintage Datsuns as you know. They don't sell like Hot Cakes LOL
So to have full stock your talking about 120 parts. 50K ++ not a good investment. ANY INVESTOR OUT THERE LOL
I'm here to help if I can.
Happy Holidays Joe
-
I would be happy to have a run made. It would take a deposit of 50% and at least 4 orders. I could sell them at a 10% discount. It will take 9-10 weeks to make.
Happy Holidays Joe
-
It was implied in another thread that you were out of stock. So people started looking for alternatives.
http://forums.hybridz.org/topic/126482-27-spline-cv-hub-adaptors/?do=findComment&comment=1182246
Out of stock doesn't mean i cant get them. It takes 9 week for the manufacture to make a run of ten for me.
Happy holidays Joe
-
Hi Guys, having a manufacture change his programing to make a small run of parts most likely won't happen.
And if it did it would surely cost more than the original part due to low volume.
I am sure my manufacture would knock 30+% off if we could get a 100+ parts ordered.
However that won't happen unless someone has an extra 20K in there back pocket so we are stuck with high cost due to very low volume.
Back in September I posted in the group buy section offering a 10% discount on my products.
The offer is still good now. Why reinvent the wheel with unproven parts to save a few dollars.
A lot of work went into these parts 15 years ago and have a good track record.
If I can help let me know.
Thanks Joe
-
I'm offering a group buy on some of my drivetrain products.
I'm offering a 10 % discount it does require a 50% deposit.
Please call or email for details.
-
zivbiton looks like the ebay seller and silverminemotors sells the same. Looks like the same person.
Joe
-
Well not only is the discount gone they have increased there price on all the parts they make. Some items have gone up over $100 per part. The sad part is
the price went up without even a phone call to let me know after 5+ years of doing business with them. I'm trying to fill the orders I have at the old price.
Thanks Joe
-
Hi sorry the price discount was a special the manufacture was running. Regular prices apply now.
Thanks Joe
-
I have new 280ZXT adapters if you need a pair.
Joe
-
Tbcrow, I hope to always have stock.
Happy Holidays
Joe
-
-
Hi here is another picture of what is included in my 930 CV kit.
-
Hi Guys i did some number crunching and I can sell the 39 spline kit depending on components for $2635.00 - $2875.00
Happy Holidays
Joe
Broken 4340 Stub Axle threads
in Drivetrain
Posted
Yes there was a batch that wasn't annealed properly. Somehow they slipped thru their QC. Common problem is what you see here too hard the end just snaps off. If you have a set you would like to have checked please send them back to me. I will take care of it for you. Sorry for the inconvenience.
FYI the manufacture just upped their price on each part by $50.00. So that puts my cost at $750.00 plus shipping almost what they sell them for. Don't forget I need to buy 10 parts at a time.
Thanks Joe