Graeme
-
Posts
95 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by Graeme
-
-
Crusher, the filters are connected that way just for the dyno tune. I will be running them down to the front of the radiator, later on.
Cygnusx1, thw wheels are an Aussie brand called Simmonds. They are a three piece wheel and make custom offsets.
Guys one of the main reasons i went for gas research was to pass the emissions laws.
When i was talking to the engineer before i started he stated unless its a current engine as in the latest ADR,s then forget about passing. I would of had to go an fuel injected late model chev and my wallet isnt that big.
So with the LPG, i pass emission easily, i can rebuild an old chevy small block which saves me big time.
I dont need cats, and the thing costs me more than half the price to run.
Mike, i am currently running 9.6:1 comp but later a blower is planned.
Should be expecting around the 400hp mark.
-
more pics, she goes in to the dyno for tuning on monday. Hoping to get around the 400hp mark.
-
Thanks guys, the color i picked myself its just called blue violet and the crane is a darker color but the cheap camera didnt pick that up.
As for the gas research, i ordered the parts from the main rep who is based in Brisbane.
Go the the website and call the 1800 number you will most likely get Denise and she can advise you on cost and waiting time.
They are currently flat out and a wait for parts is on the cards.
Price, for a twin system i cant see much change out of 2 grand.
I already had a single setup from a previous engine and i bought the extra parts i needed and the extra parts being:
converter
carbie (matched to ur power rating)
manifold
linkage and bracketery.
was just over $1100.
try http://www.gasresearch.com.au
Hope this helps.
Graeme
-
coming together now boys!!!
Twin gas reseach throttle bodies running lpg only.
-
ok some more pics!
Radiator is in and have made some brackets for the pod filters.
Waiting on a call from clark rubber to get some new air intake 3" piping.
brakes are bled and battery tray fittted with a layer of thin rubber in it for the battery to sit on.
I am making the battery leads and re-routing the wires as neatly as possible.
Still waiting also on the twin gasresearch carbies and convertors.
Back to work tomorrow so the process will slow a bit.
I cant wait to hear it though!
Graeme
-
John, that is a BEAST. What times have you run in the past?
No flares i am impressed.
Graeme
-
Dragz it was from Eagle autos in Melbourne.
Thanks for the kind comments.
-
Thanks for the positive feedback guys.
Jerry, i am running a 5 speed supra box, and the headers are just block huggers from the local auto spares.
The exhaust was custom built with twin pipes to the diff with hot dog resonators then into a 3 inch single with a high flow 3 " muffler on the end.
Cheers Graeme
-
In the first pic i am about to tackle the rewiring. The voltage regulator and ballist resistor will be removed with other unwanted bits and pieces.
Second pic the engine is in, notice the lack of wires now and also the 1" master cylinder for the brake upgrade.
Third pic, 300 mm vented slotted rotors with pbr claipers.
Fourth pic, a trial fit with the Simmonds for clearance.
-
yeah good idea Pete, i have the supra box behind mine.
I got the conversion off "THE GREAT ROD".
I used a universal throttle cable that worked fine for me.
For the engine mounts i used the standard datsun with some 10mm plate to set them back and another block of alloy for height.
I will try to find picks for you.
Graeme
-
Bartman, just 15 minutes down the road is a chevy engine importer that have an extensive range of new chev engines.
They even sell the LS7 new.
I put the exhaust manifolds on today and made some brackets to keep my leads neatly in place, i am totally enjoying myself hehe!!!
-
Finally i picked up my new crate motor!!
400 hp roller cam roller rockers single plane manifold, HEI.
I will show my progress as i put her in!
Graeme
-
Hello and welcome, i made my own mounts and got the engine sitting as close to the firewall as possible, its also sitting a little lower than the jtr.
i made the trans bracket too.
i had my engine in and out 10 times to get it right but well worth it.
Just make some.
-
Ok, i am in the process of building up a 350 want to make about 400-450hp.
I will be driving it on the street and the odd track day but i am not sure which way to go a or m tran.
I used to have a 5 speed which can handle 300hp so it will have to go. I found it great on the track but at time gave me the shits in traffic.
Please help me decide and what auto would suit this setup?
Thanks
Graeme
-
which state are you in, i have done it in victoria, but other states are probably didfferent.
-
was almost like the rockers needed adjustment, or a sticking lifter perhaps.
-
wow that sounds great!!!
i did notice a slight knock or tap coming from the engine though,
What is it?
-
Hey Mike kz what do they mean by a solid core ignition wires?
Thanks also for all this info i am going the t56 down in Aus.
-
What have you got the shockers adjusted at?
I have 175 f and 200 r with koni classics adjustables set to softest setting, but think i will go firmer.
What do you think?
Graeme
-
in reading this thread, am i right in saying that the arizona z brake rotors need to be machined after buying the kit???
Why is this so when its a new kit?
Why dosn't arizona z do this?
I am ready to upgrade my fronts and was ready to order but in reading this im suss.
I dont want to be machining rotors after buying a new kit!
Am i correct is saying this/
Grae
-
-
I am about to upgrade my 67 350chev carbed.
I am considering the LT1 with a carb, is there many differences between the blocks and install seeing my mounts all suit the older block?
Any help would be great.
Cheers
Graeme
-
thats good news Danc, i am really liking the warranty side of things and the fact that they are new engines.
Wow! THE FAST BURN IN THE 280ZX WOULD GO WELL!
i dont think my pockets are that deep.
Cheers
Grae
-
I am thinking of cutting a hole in the bonnet to let the new engines air cleaner pop out. But do i scoop or just leave the air cleaner chromed and on its own so i can see the engine moving?
Anyone got a hole in there bonnet?
Cheers
Graeme
Alternate B&W T5 clutch slave set up.
in Drivetrain
Posted
Thomaz great right up!
I am replacing my stuffed SC at the moment and wanted to know how much pull in mm or inches does the wilwood have?
My old SC didnt seem to have enough throw to correctly disengage the clutch.
Cheers Graeme