[Machining Bell housing for S13/14 5 speed swap]

I had an issue finding someone to machine my bellhousing too. Finally found a guy by word of mouth that was a machinist specializing in heavy duty diesel and marine. Ended up paying $200 and was done in 1 day. Everything was done with precision and accuracy. Maybe try calling some semi-truck shops.

[Wanted, P90 two piece thermostat housing]

I have a 2 piece thermostat housing from my p90. Let me know if that is what you are looking for...

 

 

 

[Parts car to cut misc panels]

If anyone has a parts car or old panels that they can cut up im looking for a passenger side quarter panel end/ dog leg and a drivers side taillight surround/ quarter panel corner. If you have a car you can cut up or those parts, please PM me.

 

 

[passenger side quarter panel end / dog leg repair panel]

Trying my luck to see if anyone might have a passenger side dog-leg repair panel before I buy one online. Please let me know if you have one and how much you want for it. Thanks

 

[WTB: Triple Carb Set up and ignition]

I have a never before used Electromotive XDI ignition system plus a BHJ 60-2 pulley and another OEM Hyundai 60-2 pulley included with it. Let me know if you are interested...

 

 

 

 

[WTB 81-83 stock turbo and engine wiring harness etc]

I have a factory engine harness from an 81 turbo. Located in SF. PM if you need more pics or info. Open on price or for trade.

[WTT/WTB: 280z (taller) strut insulator mounts]

Got a set of 4 in the mail today from another member. Thanks everybody for the PMs and swift responses. 

 

Mods, please close!

[WTT/WTB: 280z (taller) strut insulator mounts]

Got my coilovers welded on and turned out a tad lower than i was hoping for, so looking for a pair or even better a set of 4 280z rear insulator mounts. I have a set of 4 240z mounts in good condition i can trade or just buy yours flat out. Let me know your price shipped to SF 94121.

 

Below is the picture of the difference of the 240z vs 280z mounts for reference.

 

 

[240z Proportioning Valve]

Bought a new wilwood adjustable valve. Please close thread

[240z Proportioning Valve]

Thanks, i saw that. But it looks like its seen better days and they want almost 20 bucks more than a brand new Wilwood adjustable one. And for that price i might as well do just get the Wilwood valve. I was just hoping to get a cheap replacement and to get the car back on the ground.

[Connecting rod]

I got a set of rods and pistons from a 81 l28et. All in great shape. Id like to sell em all as a package. Make me an offer.

 

[240z Proportioning Valve]

Looking for a proportioning valve from a 72 240z. Might be compatible from other years a well but needs to be exactly as pictured. Please let me know if you have it and how much shipped to 94121 SF,CA.

 

 

Item 1 in the diagram.

 

 

[WTB: Front cover bolts + water pump bolts]

Thanks Borini63,

 

A local member seems to have everything im looking for. But if i end up needing more or extra, ill definitely PM you. 

[WTB: Front cover bolts + water pump bolts]

Well after waiting over 2 months for MSA, i think its obvious ill never get these bolts from them, so im looking for a set of front cover and waterpump bolts. Used is fine as long as all the threads and bolt heads are in good condition. Let me know your price shipped to 94121

[need 4 kyb strut gland nuts]

Unfortunately, i do not have the washers, nowhere i can recall as of now anyway. Might be something you might be able to find at a hardware store perhaps? 

[need 4 kyb strut gland nuts]

Not sure if there is a difference between the KYB and oem gland nuts, but i have a set of 4 (front and rear) oem nuts. Good threads, overall clean and usable. Let me know if you want em.

 

 

[WTB thermostat housing and sensors]

I have a nearly new one from an 83 l28et, great condition. Let me know.

 

 

 

 

 

[wtb 280z stock camshaft]

I have a good one pulled from a P90 head. Let me know

[m111 oil pump]

Hes referring to the Melling M111 oil pump, which is the turbo automatic, higher pressure/ higher flow pump.

 

Ja1991 - I bought my M111 brand new from Northernautoparts for a good deal.

 

http://www.northernautoparts.com/ProductModelDetail.cfm?ProductModelId=16220

[Wheel Show! Post your pics of you wheels]

How much do the spinwerks weigh?

 

 

I just weighed my bare rim (spinwerk 15x10) and it came out at exactly 16lbs.

[Wheel Show! Post your pics of you wheels]

Going to test fit these bad boys tonight.

Spinwerkes 82 series

16x9.5 -32

16x9.5 -25

 

I actually got a buddy who is running the spinwerkes in 16x9.5 +0 all around with perfect fitment with just a roll.

 

I personally have a set of Spinwerkes as well except 15x10 -12 all around. Tested them on my other friend's Z and looks like a nice roll and slight pull will clear em hopefully.

 

[Strut hat thing]

I believe i have a pair from a 280z, ill get pics and PM you tomorrow.

[In dire need of a 77 280z thermostat housing]

I have a practically new thermostat housing from an 81 turbo. Should fit no problem. Also has extra provision in case you want to add a sensor. Take a look and let me know if you are interested.

 

 

 

 

 

[Looking for 280zxt Parts (Turbo, Trans, Misc.)]

I have a turbo oil pan, PM me if interested, also have a l28et downpipe for s30 chassis with o2 sensor.

[Evap removal/ gas tank help]

Unfortunately I not only already removed it but rushed and tossed it too. From the few results I found on the topic, seemed like it was doable, so I did it. Now I realize the issue. With that in mind, is there a way perhaps I can run the main vent hoses to a vented bottle or can of some sort? In a sense, make a home made evap tank? Or perhaps even a vent hose with a small filter on the end?

 

Thanks again for the input everyone!