01vincer6
-
Posts
133 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by 01vincer6
-
-
I almost bought the fenders but they are mostly fiberglass right?
-
Ya Facebook Retrospec if you want quicker responses.. Mine shipped out in about 4 weeks through them. Palm Composites I ordered the carbon door panels on a Friday and had them by Thursday.
-
I have the front air dam and cowl in carbon. Not a bad product but their lead time is nuts. Palm Composites is better quality but less available atm.
-
I mounted mine to the outside of the headlight bucket and not the inside like you have pictured.
-
Had to order a set because its so bada$$
-
Crazy to see how much time is involved making carbon parts. Excellent work
-
I will build you one for under that.
-
Contact zcardepot.com. I think he might be able to offer something.
-
Whatever you think its worth idk..
-
Heading out of town but will get it removed when I get back.
-
Sorry I will try to remember tomorrow.
-
I have one. Let me see if I can get it removed today.
-
-
See my post with wheels and slicks. I also have an r230 vlsd
-
Thanks cgsheen. I ran the black yellow to a relay then to the starter solenoid. Started up without a problem. I will post the final wiring layout for anyone wanting to use this new jegs 20 circuit with an msd ignition when I get finished.
-
I think I have everything figured out. Reading old schematics while hungover is not the easiest thing to do. The Black Yellow I will test continuity to see its purpose.
-
Just figured many others have done this and had a simple answer. I didnt think you needed to add a resistor to the green white and an accessory relay.
-
MSD wiring..
-
That one added more confusion lol.
-
This one says the White/red goes to the ignition power ..
Jegs 20 circuit is what I am using.
This car has a zz383 with carburetor. Using MSD ignition box and blaster coil..
-
I have found alot of mixed information probably due to the different wiring colors per year.I need to know what wire goes where from the ignition 6 pin connector. I have from the switch 5 wires on the connector. Black/Yellow, Black/White, Green/White, White/Red, Blue/Red. My new Fuse panel requires a (Coil) IGN wire,(Ignition switch Accessory) ACC, (Ignition Power) Bat.
I believe the Black/Yellow goes to the Ignition (Coil) wire and the Black/White goes to the (ignition power) Battery wire. Does the Blue/Red and White/Red go to the (ignition switch Accessory) ACC? Also does there need to be a relay between the ignition power and the fuse panel?
-
Just mounted my speedhut gauges. Finally got to use my crack free dash also! I used the old gauge plastic bezels and epoxied them to the dash then mounted the gauges to them. For the tach and speedo I used the speedhut billet adapter which were epoxied also.
-
1
-
-
-
I went over to his shop and looked at them. Very good quality and sturdy. I am going to get a set of the 240 version when they come in.
240z passenger rear quarter panel
in Parts Wanted
Posted
Looking for a 1972 240z passenger side rear quarter panel. Change plans for fender flares and need good panel. The new sectioned replacements available are to small to cover the area..