custom280zx
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by custom280zx
-
-
Hi, nice build.
i also have a s130 280zx with an rb26 conversion only i still have the twins.
i am alose looking to go a decent size single top mounted.just wondering if you had any trouble fitting the topmount turbo under the bonnet?
looking at mine, the rockercover only just fits under when i close it.thanks
-
checkcheck
-
thats for the tip mate
-
got one you can have with halfshafts out of a 1982 auto 280zx for $150 or an r200 centre for $300
-
hey guys! im looking for a good set of after market shocks either seperate or with springs for s30 280zx 1982 targa.
let me know what u got!
cheers!
Hayden
-
i dont recomend 19" ide say 18s would be fine but... ive got 19" on my 280 at the moment and the tires scrub and grab the front quarter pannel
-
could anyone give me a quick rundown on what diff i sould be putting in my 280zx2+2 (auto shell) conv rb26dett? i have the r180 in there at the moment, im looking too do the r200 swap but not too sure what i need to do or what im needing too adapt? will the r200 half shafts fit the same as the r180 shafts on the cvs?
thanks for any help
hayden
-
anyone looking too sell a set of r200 axles out of a 280zx manual and you live in australia let me kno! cheers.
-
ahh dont mind my last post thanks for that make ill have to do some searching for greddy sumps on the net thanks for ya help careless
-
hey guys im wondering if anyone knos any part numbers for the sump too use in a rb26+280zx 82 conversion? also im in need of engine mounts, would anyone kno of the best mounts too use even if i have too slightly modify them?
cheers
-
I'm new to this forum, but I think I can be of assistance to any Aussies out there who want to do the RB Conversion into their Z. I am just finishing off my RB25 Conversion into a 240z. It is much easier than I am reading in this forum and alot easier than I thought it would be myself. Its like it was made for it. I used SR20 engine mounts, made a bracket to attatch to the block and the mount and presto, fits bloody great. The gearbox was the next mount I made. Which was easy too. Just did a u shape bracket and the stick fits up in the standard whole. The sump I am using is from an RB motor that has the sump bulg and the pick up at the rear(cant remember the model, ill let you know). It only needed minor mods to miss the rack but it fits great.
If there is anybody out there that wants me to make up some of these brackets, ie gearbox and engine, let me know. Ill have to work out a price.
The plenum is the next trick. I didnt want pipes snaking all over the engine bay, so I got a custom plenum made so the intakes on one side and the turbos on the other. This, once again looked like it was made for it. The cooler is a custom joby. Its the same size as what they use in the gtr just alot thicker.
Let me know if you have any questions.[/img]
hey mate, if these mounts work as well as u say they do ide be interested in buying a set of the engine mounts and transmition mount off u. where abouts in oz do u live? please pm me if you are interested.
-
hi guys, Hayden here this is my first post to hybridz
im looking too rb26dett my 280zx, ive got a rb26dett with 26box lined up for 5.5k im new to the rbz conversion so bare with me
First of all i would like a few opinions on the makeing of the custom sump. My old man is a fitter welder by trade, is it a difficult task? will i have to design my own? or would anyone have a template that i could follow?
Secondly, after setting up the awd transmition too rear, will the stock 280 driveshaft fit? or is there a driveshaft out of something else that will fit snugg?
thanks guys!
much help needed
-
hi guys, Hayden here this is my first post to hybridz
im looking too rb26dett my 280zx, ive got a rb26dett with 26box lined up for 5.5k im new to the rbz conversion so bare with me
First of all i would like a few opinions on the makeing of the custom sump. My old man is a fitter welder by trade, is it a difficult task? will i have to design my own? or would anyone have a template that i could follow?
Secondly, after setting up the awd transmition too rear, will the stock 280 driveshaft fit? or is there a driveshaft out of something else that will fit snugg?
thanks guys!
much help needed
Sign in if you own an s130!
in S130 Series - 280ZX
Posted
Hi!
here is my 280zx s130 (82) rb26dett converted, vipecv88 ecu, rb25 box, r200 diff, koni shock setup with kingsprings, dragway pro wheels