yaseen2492
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by yaseen2492
-
-
pm me your info and if you are on Facebook there is a Z group local here in lower NYC area.
For some reason I can't PM you. I keep receiving an error.
450+ rwhp is very doable in an 2.8 L series motor without meth injection if it's tuned correctly. I'm pushing 600...no meth inj. To get good reliable rwhp it's all about air flow. My only suggestions in addition to your proposed set up would to look into a good turbo cam (lots of posts here on turbo cams) focus on lift not duration, lower the static compression to somewhere around 7.5-7.8, and port the stock turbo exhaust manifold especially where 1-2-3-4 converge. I don't know Holset turbos. I work with Garrett. Just make sure your turbo supports your hp targets. Next steps would include a drivetrain that safely handles 450+ rwhp, lightened/aluminum flywheel, clutch, trans, larger driveshaft with solid u-joints (Spicer 1310), and upgraded rear axles, cv's etc.
Good luck and have fun.
Interesting, thanks for the info. Would you mind telling me more about your setup?
-
Where in NY are you?
I'm in Nassau County
I see you're from the bronx
I have yet to find much of a Z community around here
-
Hi all,
This is my first post on this forum. I have a 1970 240z that I am currently working. I am picking up an L28et as well as a 5 speed transmission from a 1983 280zx. I am looking to get a good amount of power out of this engine (around 450+ whp). After hours of research I have come up with the following
L28et
P90 head- port and polish
dewebbed intake manifold
JE forged flat top pistons (raise compression to 8:5:1)
Injector 550ccHolset hx35 turboFuel rail? Depends what's out thereStand alone megasquirt ecuDifferential 3.9 or 4.11 r1803" exhaustI know I am missing a few things but I just wanted to get your guys input. I am new to these engines so please bear with me. Thanks. -
I bought my first 240z not too long ago and found out it was far too rusted. Im looking for a 240z shell/roller preferably with no interior and minimal rust. The condition of the paint does not matter to me as I plan on doing a respray. If anyone is selling or knows someone who is selling a solid 240z shell/roller within 150-200 miles of new york city please let me know asap. I want to get her on the road next summer.
please pm me or email me at yaseen2492@gmail.com
any help would be greatly appreciated
thanks!
240z L28et Build
in Nissan L6 Forum
Posted
wow impressive, do you have any pictures or videos of this car online? I would love to see it.