Jump to content
HybridZ

sdj02

Members
 View Profile  See their activity

  • Posts

    12

  • Joined

  • Last visited

 Content Type 

Everything posted by sdj02

  1. sdj02
    I know the width will clear because the 60 and 70 series are both 8.9 inches wide, but how much clearance do you have from the top of the tire to the fender well? The 70 series is about 1.8 inches taller. Thanks for the info!!
  2. sdj02
    According to the chart I use the diameter is 27.4". I know that is tall, but with my gearing in the 727TF I need a tall tire. I was just wondering if I could stuff them in there. Thanks for all of the info!!
  3. sdj02
    Anyone???
  4. sdj02
    I have come up with some good tires that are 225/70R15. I need new tires on the rear of my 280ZX. Can I fit these tires on the rear? I have stock suspension and the stock swastika 15" wheels. Thanks!!
  5. sdj02
    Thanks for the info!!
  6. sdj02
    I have a 1983 280ZX and I am trying to find out what the largest tire I can put on it is. I have searched, but did not find my exact situation. I would like to keep my stock wheels. I do not know what my wheels are off of, and what offset they have. They are a 15" wheel. Can someone tell me what wheels I have, and what tire I can fit? I think I am at stock height, but I have a 318 V8 in the car which might lower it a bit. Any help would be appreciated!!
  7. sdj02
    John, What shocks would you recommend for my use? I see on your web page you have different choices. Could I go with the $58 shocks and use my stock springs for now? Thanks!!
  8. sdj02
    I have a 1983 280zx with a 318 dodge v8. I recently got this car, and when driving on the highway it will bottom out sometimes. I have been searching for spring replacments, but everyone I have found will lower the car. I do not want to do this. Is my problem struts, springs, or both? What are my options to beef up the front end to keep from bottoming out? I know my struts are weak. Could this be my whole problem? Any recomendations would be helpful. Thanks!!
  9. sdj02
    Sorry....I am very new to these cars. I did not realize there was 2 different panels. I have the digital panel in my car. I am now in the process of trying to remove the panel to check all connections. Thanks for all of the help.
  10. sdj02
    Ok. I am really new to these cars. This is my first one. Can you explain where to check the gauge with the ohm meter? I am sorry for being such a newb. Thanks.
  11. sdj02
    I just got this 280 ZX hybrid with a 318 in it. I understand why the factory engine gauges don't work, but the fuel gauge does not work either. The light works when it is low, but there are no bars on the gauge at all. I am new to this world of Z cars. Can someone point me in the right direction of where to start with this problem? I don't want to replace a sending unit if there is no power to the gauge or something simple like that. Any ideas would be helpful!! Thanks.
  12. sdj02
    Just wanted to say hi. I just got my first Z car. 1983 280zx hybrid with a 318 and torqueflite tranny. I am hoping to find some different wheels first. Can anyone let me know where to find some good used wheels for these? Whoops.....just realized I put this in the wrong forum.. Mod, can you move this for me to the S130 forum? Sorry......leave it up to a newb.
×
×
  • Create New...