[Project Turbo LS1]

say it aint so!!!!

[Project Turbo LS1]

thank you

[Project Turbo LS1]

im sorry, i just started reading the thread over again for the second time and i realized that you already answered my question, except for the header flange.

thanks

[Project Turbo LS1]

i checked out that mcmaster website and im curious of which butt welds you used? small diameter, big diameter ,length, and thickness. also where did you get the manifold flange? i read somewhere once that do to heat expansion with a stainless steel flange you should cut a line between each runner on the flange, if not the manifold bolts could shear off. just something i thought of while looking at your pics.

[280zx Turbo V8]

i didnt notice if you mentioned this or not but what do you use for your fuel system, pump , regulator ect.?

[Calling all Turbo V8z's your experiences what you learned and what would you do diff?]

i like this topic and really enjoy all the turbo guys feedback. Hey Kechup if your there lets hear what you have to say. I get excited when ever I see your car on here because its the same color as my 71 and i can imagine mine with a big turbo!!

[Turbo Tom kit with TB injection]

keep the draw through!!! If you want i can get the number of the guy who built my carb. runs great , and old school power plants kick ass!!

[L6 Turbo Header Group Buy]

im in if the price is right!

[Cylinders #5 and #6 strike again - Head Gasket #3]

how thick is it? interested in selling one?

[Cylinders #5 and #6 strike again - Head Gasket #3]

where did you get the copper head gasket. i have the 2mm three peice and want to change to 1mm but the only one i can find is $259.

[Cylinders #5 and #6 strike again - Head Gasket #3]

i understand that you have some detonation issues but why dont you upgrade to a metal gasket.

[Cylinders #5 and #6 strike again - Head Gasket #3]

i may have missed it but what head gasket do you use?

[singleturbo carbed 320hp l28, looks easy please look!]

DatsunD, my plenum is all aluminum, and so is the stock intake if that is what you plan on using. the only problem with fuel is possible puddeling in the plenum under the carb if it is sitting too low. I did some tuning on my holley two weeks ago and took acouple of laps on a back road by my house, felt awsome at 20lbs!! cant wait to hit the track!

[singleturbo carbed 320hp l28, looks easy please look!]

it depends where you live. if it always warm you shouldnt have too many problems. my engine always fires up with little effert but i have heard storys that if it isnt designed well the fuel will puddle and cause problems. im always down for different and unique things when it comes to cars, i shouldnt have said you shouldnt do it for a daily driver, i should have said you may go through some trial and error for awhile, so i would have a reliable vehicle aswell.

[singleturbo carbed 320hp l28, looks easy please look!]

also turbo mustangs is a great website. if you are looking for a blow through setup, check out csu carbs. alittle pricey but great rep.

[singleturbo carbed 320hp l28, looks easy please look!]

i have read maximum boost, corky is a smart guy but i wanted to do a draw through, and it works fine. I still havent driven the skyline much but when the engine was in my 280z it ran 12.79 in denver without the nitrious, i dont know what that is at sea level but it felt pretty fast. i wouldnt do it to a daily driver. the intake manifold is a stock non turbo that was cut up and welded. the carb sits on top of a homemade plenum that feeds right into the turbo. kind of simple but kind of a pain in the ass.

[Problem with oil pump drive]

cool!!!! good luck

[Problem with oil pump drive]

could be, sorry to say it but you need to pull off the front timing cover and reinspect everything, the slinger also has to go on one way, it could be backwards. good luck

[singleturbo carbed 320hp l28, looks easy please look!]

i have a draw through setup with a t3/t4 and a holey 4 barrel . i 've only driven it around the block so far but feels great.

[Z32 sbc 350 swap pics and more to come!]

sounds like fun!! what are you going to do with the VG??

[Problem with oil pump drive]

the pump drive gear is the worm gear on the crankshaft. that gear meshes with the gear on the oil pump drive shaft, if the gear on the crank is on wrong the two gears wont mesh. the drive gear on the crank is chamfered on one side, one side will have a different tapper to it, that side faces the main bearing journal. do you own the how to modify your nissan and datsun book??? if so turn to page77 there is a pic of the crank pulley, behind that is the worm gear,than turn to page 93 , read where the headline says install external parts. I hope this helps..

[Problem with oil pump drive]

i could be wrong but i really think that the drive gear is on backwords. the chamfered side should go on first , facing the inside of the crank, if its not the gears will not mesh.

[The skyline is alive..]

actually its alot better to blow through for a few good reasons. all you really need is a blow through prept carb, there are a couple of good companies that build them, csu is the best that i know of. you also need a blow off valve . the most benificial reason for a blow through is you cant run a intercooler with a draw through becouse the whole system is full of fuel so if you have a backfire through the intake the whole thing goes boom!! also the throttle responce with a blow through is supposedly better. thanks for the possitive responces and sorry for all the miss spellings, its really late for me and i have drank way too much.

[Need just a little more power on a budget!]

Nitrous!!!!!!!!

[Problem with oil pump drive]

maybe the oil pump drive gear on the crank is bent or distorted.or maybe on backwards, its been a long time since i have rebuilt me engine but im pretty sure that is possible.