240devilz

450 lbs of torque on a awd car or front/rear car?

h Thanks i'll check this out

Well i'll save money cause I don't think the obx is worth it and I don't want to pay 400$ to tear it apart and take a chance.

Thanks that is what i was looking for.

I do more more burn out than launch. I already switch for 280z stub axle for more security. I never put the z on track or drag, but kindly hard on it on the street more often. I just want to decipate the power equally cause it dont lock the 2 wheels anytime and I'm affraid of spider gear failure. Since is it a street car for cruisin too, I don't want to weld it.

Thanks for the advice, so I'll keep my r200 since it already handle my power. What about the obx? What you think?

I read about the obx but its seems that is the cheapest lsd unit on the market so the quality goes on right? I have seen people say that these unit get wrongly assembled more often, so I'm not sure about this one, unless someone has a good tips or link that explain how to check it and fix it.

How much torque the sti diff its supposed to handle? Don't find to much info on this.

V8 is for version 8 subaru , its supposed to be a 2004 . I heard that the k stamp subaru lsd are the stronger 4 pinion available but im not sure.

Hi guys I have 72 240z with jtr conversion 350 chevy mild cam, around 375 lbs torque with t5 borgwarner. My z is a street car and don't want to weld my diff. Currently my diff is a open r200 3.54 . I want to go lsd and I've already use the search button plenty of times and I just want to be sure what I'm doing and buying. First of all, do you guys think it is worth to swap a subaru r180 and buying stub from wolfcreek to get it fit instead of my r200? Will it handle the torque from my v8? I came accross what i think is a pretty good deal so it is tempting, its suppose to be a r180 lsd 3.9 out of a v8 subaru sti 2004 for 280$ from what the guy told me. Here's the differential

y yes i saw that post and was wondered why my jtr book is telling to use a .75

hi everyone, first sorry for my english, im from québec so i'll try my best. I have toyota 4 piston in the front with 280zx rear,stock booster and master. I do a restoration on my z and notice that the proportionning valve was blocked (due to all these years sitting in junkyard) . i'm not able to make it repare in my town and its very hard out here get a another one so my question is what can i do to solve my problem and have a good working brake balance? i want to keep nissan fitting on the brake lines cause i haved big problems flaring stainless lines to put ssbc proportionning valve and fitting..i was thinking putting a pv from a 240sx or z32 .. Is that someone has already made this and does it works? or can i keep the oem 240z pv with my setup? help me cause i have a jtr sbc swap in the front to stop.. give me your opinions and ideas please... and yes i know that i am a newbie...i search but find nothing

hi everyone, first my name is manello i'm from quebec, canada so sorry if my english is poor i'll try my best . i have 72 240z, i've been restoring it since five years, lot of forum here help me out with my z. I have 350chevy engine mount to a t5 borg warner, jtr mounting kit. my problem is that the gears wont engage when the engine is running. I have a the jtr book and make my setup with this . I currently have a .75 titlton master , 24inch braided -4 hose mount to oem plastic camaro slave. everything is new. i bleeded the clutch and everything is ok no air in the line. i really feel that i have a clutch, but its not working. i begin thinking that my fork on the transmission dont make enough travel...it move about 1 1/2inch rearward ...is that enough!? i really dont see anything else it could be

I every one, first sorry for my english. I have a 82' 280zx and have problems with my tranny. the body of my z is a turbo one but have no longer a l28et and was change for a l28 and i dont think that i have a t5 from the turbo version.I was thinking it was a earlier 280z tranny and part for datsun around here are pretty inexisting so i found on the net a rebuilt z31 tranny, it was on a 86 vg30et. Here is couple of pic of my 280zx tranny. do somebody here know if i can pick the bellhousing of my 280 tranny and bolt it on the z31 turbo tranny? and if is possible, do i need a custom driveshaft? thanks manello 82' 280zx 87' 300zx turbo 71' 240z 350ci/t5