Search the Community
Showing results for tags 'timing control'.
Found 1 result
-
Hey guys. I guess I'll consider this a follow up thread from my last one here(http://forums.hybridz.org/topic/124831-megasquirt-ignition-and-timing-problems/). The car cranks and runs. I don't think my MS is controlling the timing but it's producing the spark at the least. I've gone through the tests to check for my commanded timing and my actual timing with no luck. The timing on the crank is really sporadic at idle and the timing marks disappear and reappear when I increase the RPM. It seems wherever I adjust my dizzy manually, is where it stays at during idle. The stock dizzy on 85T vg's is electronically controlled. Could my stock ECU be interrupting the MS's signal? (I haven't gotten around to going completely standalone YET, but I'm taking this one step at a time). I've got the car running which is a big step, but I've got no timing control, either in "fixed advance" or "use table". I burn and cycle the ecu whenever I'm prompted to. I've hit a wall with this. Hardware Pin 36 connected to the ?signal wire? on the stock power transistor. (I've tried all the other wires going to the coil, and this one is the only one that seems to work. It's the G/B wire) Pin 24 is connected to the CAS correctly because I am getting an RPM reading on the dash and in Tuner Studios. (It's also really sporadic) I have the B&G prebuilt MS2 v3.57 with 3.3.0 firmware from DIY Stock dizzy and ignition coil + power transistor DIY Nissan Optical trigger wheel Here is a datalog while idling and my current tune. I've got the tooth/composite/trigger logs but they are .csv files so they aren't of much use. I still haven't really figured out how to troubleshoot with the datalogs, maybe one day. Thanks zx2.zip CurrentTune.zip
