Jump to content
HybridZ

rb25det turbo question


boarderline

Recommended Posts

hey guys, so I am building my z32 rb25det project and trying to find a good trim for a turbo. I would like to be in the 400hp range but dont want the turbo to take till 4000 rpms to spool. I have aftermarket intake manifold and turbo header. I was looking at maybe a gt35 with t3 flange, .70 compressor ar and a .63 exhaust ar, what do you think?

Link to comment
Share on other sites

no its lots smaller than 3540 and much stronger in the mid range. it will come on 800rpm better than the 3540, the gt35 starts to go at 4000 and will go well all the way to the red line and will make lodes of power ,but there a bit slow to respond its, a much better turbo on a 3L rb30

Edited by PMC raceengines
Link to comment
Share on other sites

OK i will give you the part no and spec this is what i go to for 300kw atw, full boost at 3500 strong all the way to 7000 18psi 300kwaw on RB25 ... and order it with .82 rear housing t3 and 3in outlet best rb25 turbo for street and track

PN 700382-12

CHRA pn 7001777-7

trim 76.20

AR 60

ind whl DIA 57.00

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...