AkumaNoZeta Posted October 7, 2012 Share Posted October 7, 2012 (edited) I just took the compression rod off the suspension on the driver's side and the little "buckets" that the bushings fit inside of on the frame were rusted past the spot welds and came off with it. The main part on the frame seems to be just fine, just the small pieces were ate up. Does anyone have any ideas on how to make or find something to replace them with? Here's a photo to help you understand what I mean. Edited October 7, 2012 by Grim Quote Link to comment Share on other sites More sharing options...
flyboy2 Posted October 7, 2012 Share Posted October 7, 2012 I was able to find a freeze plug that was the same size (Dorman P70C). All I Had to do was to bore a hole in it (I don't recall the size). Worked great. Quote Link to comment Share on other sites More sharing options...
AkumaNoZeta Posted October 7, 2012 Author Share Posted October 7, 2012 That's a good idea. Thank you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.