dsommer Posted October 8, 2014 Share Posted October 8, 2014 I had new floor pans put in my car and the original seat risers where not replaced. I had them put 1X1 square tubing in the floor for the seat risers. I belive these are in the wrong positions (too far forward). Can anybody provide me a measurement from the firewall or any point of the interior to one of the risers and the distance between the two risers. This has become a real pain as I don't want to drill 4-8 holes in my new floor pans to get the correct seat fitment. Thank you!!! David Quote Link to comment Share on other sites More sharing options...
88dangerdan Posted October 8, 2014 Share Posted October 8, 2014 Here you go, 1st picture is where I pulled measurements from 2nd picture is 28-1/2 to center 3rd picture is 42-5/8 to back edge if this doesn't work and you need something else let me know Daniel Quote Link to comment Share on other sites More sharing options...
88dangerdan Posted October 8, 2014 Share Posted October 8, 2014 Pulled rubber boot off of foot rest on drivers side in picture#1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.