Jump to content
HybridZ

Mercedes Fuel Injector Question


R0N

Recommended Posts

I've read that the 1975 Mercedes 450SEL 420C Stock Injectors can be use on the ZT cars... see link http://z31.com/jwt.shtml

 

Well I found this on ebay brand new Bosch Injectors but it list that it's for the 76-80 450SEL. Does anyone know if this will be a direct drop in? BTW there selling for $18 a piece and he has a lot of them in stock, here's the link.... http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=595712151&r=0&t=0

 

-R

 

[ September 23, 2001: Message edited by: R0N ]

Link to comment
Share on other sites

As far as i know is the 450 born with mecanical k-jetronic and a z is electric so it cant be done. How about volvo 740 b23et injectors or bmw 745 turbo. A chipped non cat volvo delivers 240 hp on 98 octane = 240/4*6 = 360 hp with 6 injectors. The bmw 745 3.5 6 can deliver 350-400 hp then the injectors are tweaked to its maximum. Others have used ford turbo injectors.

Link to comment
Share on other sites

Guest Tom Scala

I'm using the '75 450Mercedes injectors in my 78zt now. They are rated at 420cc and are the same injectors Wolf sells in his Sport packages at an insane markup. They are low impedance like the stockers and fit the stock fuel rail and injector holders too. I got mine at CarParts.com. Check the application guide there and see if they are the same part no. between 75-76,I believe they are. $18 a piece is a great deal if they are new.

Link to comment
Share on other sites

76 was cis system-a constant squirt controled by flap in air cleaner housing.75 was k jet electronic.i have a vw bug place in my town that has a direct line to a major bosch importer.if i feed him a bosch number he doesnt care what it fits-he adds a little mark up and sells it.question-what is bosch part #?

Link to comment
Share on other sites

How is this for responsiveness? Also pleasing to know that some of our key vendors actually visit and monitor out site.

 

 

Hi Scottie,

 

I read this forum a bit. Don't have time to jump throought he hoops to

login. The hp is our injector sizing chart is engine HP. We don't care what

the drivetrain losses are as these are irrelevant when sizing injectors.

 

Secondly, the 0 280 150 036 and 028 injectors fit Mercedes and Volvo. They

are D-Jetronic which is an analog EFI system and have blue tops. They are

interchangable with L28 injectors except that they will not accept the L-Jet

electrical connectors. We can supply injector harnesses with the D-Jet plugs

installed when systems are ordered. The flow rate on our bench is 480cc/min.

at 38 psi.

 

We have seen a few BW remans that are not great. If you can actually get

genuine, new Bosch 036s for $18, buy them.

 

Cheers,

 

Ross

Link to comment
Share on other sites

Hey Guy's I found the post from ebay, don't know why it changed. Here's the link and the description. He is selling them for $18.71 and $6 to ship no matter how much you buy.

http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=595853155&r=0&t=0

 

YOU ARE BIDDING ON A BRAND NEW BOSCH FUEL INJECTOR PART NUMBER 0 437 502 047. THESE FIT MANY FERRARIS AND MERCEDES BENZ VEHICLES INCLUDING THE FOLLOWING. FERRARIS 1980-85 308GTBi, 1980-1985 GTSi, 1986-89 328GTB, 1986-89 GTS, 1984 BB512i, 1981-89 Mondial, and 1987-1991 Testarossa. they also fit the following MERCEDES BENZ . 1984-93 190E, 1987-1990 260E, 1977-1981 280E, 1978-1981 280CE, 1977-1979 280SE 1988-89 300CE, 1986-1993 300E, 1988-1989 300SE, 1988-1991 300SEL, 1988-1993 300TE, 1984-85 380SE, 1981-83 380SEL, 1982-83 SEC, 1981-85 380SL, 1981 380SLC, 1979-1980 450SE, 1976-1977 450SE, 1976-1980450SEL, 1976-1980SL, 1976-1980 450SLC, 1984-1985 500SEC, AND FINALLY 1984-85 500SEL. BUYER TO PAY 6.00 INSURED SHIPPING NO MATTER HOW MANY ARE BOUGHT! NO NEED TO WAIT TIL THE END OF THE AUCTION EVERYONE IS A WINNER ON THIS ONE. PAYPAL ME OR CALL ME TO PUT IT ON YOUR CREDIT CARD! 619-697-4369 DANKE SCHOEN! REMEBER THESE ARE BRAND NEW BOSCH!

Link to comment
Share on other sites

hi all

 

i was readin the post from scottie about the reply from SDS,, i did a search with the part # given and saw that the injectors were 36.19# or about 380cc's im not sure which ones were the 420cc injectors...if its true about the 380cc, that should be good for those who cant find the merker, svo injectors at pick n pulls. well just my thoughts..see yah

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...