Yvet Posted January 7, 2017 Share Posted January 7, 2017 Hi there, was just wondering if anyone had some advice they could give me on sr20det gearboxes and if you can use them with your Rb20det engine. I understand the bell housing clearly would not be interchangeable, but if you kept your Rb20det housing and put it with a sr20det box attached to a rb20det engine. Does this work, its it relatively straight forward or not!?!? Thanks! Quote Link to comment Share on other sites More sharing options...
KAZU Posted January 7, 2017 Share Posted January 7, 2017 Bell housings are completely interchangeable. You'll just need wrench, sockets, rubber hammer and a tube of silicone gasket. Quote Link to comment Share on other sites More sharing options...
Yvet Posted January 7, 2017 Author Share Posted January 7, 2017 Oh awesome, do you know if it will matches up with a Rb20det clutch? Quote Link to comment Share on other sites More sharing options...
KAZU Posted January 7, 2017 Share Posted January 7, 2017 My Z has RB25 with Tilton RB26 clutch and flywheel, and SR20 transmission. I think the input shaft is identical to another. Differences between them are rear housings, the length of the main shaft, and the lid shape of the shift mechanism. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.