GetInTheZ Posted December 3, 2001 Share Posted December 3, 2001 Hey, I am about to undertake a conversion for my 85 n/a 300zx and was going to use a rebuilt 350 and a tranny out of my uncle's 71 camaro. I was wondering If it could be done and what i would need. I have looked on this site for alot of thing concerning a 2nd gen. conversion. But, none of the sites will pull up. I was wondering specifically about the ECU and what i could live with out. I also have an digital dash that is not working and understand that can cost an arm and a leg, and was wondering if it could be converted to needle-type. Thanx for the help GetInTheZ Quote Link to comment Share on other sites More sharing options...
DavyZ Posted December 4, 2001 Share Posted December 4, 2001 You may be on your own while undertaking this. A JTR manual will help map out each catagory or phase to go through to complete the swap. Good luck! Davy Quote Link to comment Share on other sites More sharing options...
Mike kZ Posted December 4, 2001 Share Posted December 4, 2001 There is another new guy on the site that has a 300ZX V8, maybe you guys can get together and talk. shane vincent Junior Member Member # 1507 posted December 02, 2001 02:44 AM -------------------------------------------------------------------------------- hI GUYS just put a 400hp 350 in my 300zx and i need to know how to hook up the tac and temp generally im wondering anbout the wire colors in the dash. My gages are digital and i want to have the tac working weither it be acurate or not. just for looks you guys know how it is.i have figured out the speedo considering that i have the eletric drive 700r4 i had a 280zx with along gages and i hooked then into the instrument cluster from the sensor but the 300zx is new to me and i havent had a chance to run the wire colors down right just yet all help will be appreciated thanx. He posted this under "Trouble shooting/General engine" Quote Link to comment Share on other sites More sharing options...
GetInTheZ Posted December 6, 2001 Author Share Posted December 6, 2001 Thanx, I've just got a couple questions about the ecu and if the engine will fit. I'm gonna put a 327 with a 4 barrell Holley with air cleaner coming out of the hood.(NICE) and a tranny out of a camaro that i hope will hold up. I'm pretty sure it would fit but just want to make sure of a couple thing before i yank it out of there and screw it all up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.