Guest shuyun Posted February 25, 2003 Share Posted February 25, 2003 I have a Turbo Tom's setup. I need some info on what needes to be done to the l28et motor to use the current setup. It is carburated so I will not be using the efi what distributer and ingition box should be used with Tom's setup? Thanks Quote Link to comment Share on other sites More sharing options...
Guest shuyun Posted March 11, 2003 Share Posted March 11, 2003 Bump Quote Link to comment Share on other sites More sharing options...
Tony240ZT Posted March 11, 2003 Share Posted March 11, 2003 Just swap the manifolds over. I've never messed with turbo tom's setup personally, but the two blocks are basicly the same. The L28et has an oil drain hole on the pan. I believe the later model heads have holes drilled for the old carb manifolds to bolt up, and the exhaust manifold bolts are in the same spot. If you get an L28et take our your old distributor shaft and drop it into the new engine, since they have slightly different teeth. That requires unbolting the oil pump. Then drop your current distributor into the new engine. Should be pretty strait foward. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.