Chaparral2f Posted March 12, 2002 Share Posted March 12, 2002 I have an '84 300zx, and a bunch of parts left over from when I was young and rich. I am tired of Cameros and that ilk so I've decided to build a strong 327. I have a good block, a lightweight Callies 4340 steel crank, a set of Manley aluminum rods, with JE forged lightweight pistons. The heads are Brodix -10 aluminum I: am just not sure about what to do for a cam and rocker arms. the fuel system is Hilborn Mech injectors, and fire comes from a Joe Hunt mag. I have all this stuff lying around, but like I said, I just don't have any idea what to do about a cam. Any ideas would sure be useful. I know that wsith the Hilborns that I won't get the idle down below about 2500 rpm so that doesn't bother me. Also the -10 heads have large ports (210cc port volume) This is going to run through a Scheifer alum flywheel, and a T-56 if I can find one. I have installed a used Halibrand quick change rear end. That is about all the info I can offer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.