ZROSSA Posted April 11, 2003 Share Posted April 11, 2003 Howdy all, I am making a new front nose cone for my s30. My car had a standard nose on it before so I dont have any heights to work to. Could some of you that have air dams/spoilers measure the distance from the ground to the bottom of the dam. I also nee a meassurement from the front lip to the radiator x-member. If you have any problems with scraping at the heights you run could you let me know as well. Thanks Guys, Douglas Quote Link to comment Share on other sites More sharing options...
ZROSSA Posted April 15, 2003 Author Share Posted April 15, 2003 HEEEEEELP! Quote Link to comment Share on other sites More sharing options...
Guest Zachb55 Posted April 16, 2003 Share Posted April 16, 2003 sorry man, i would love to help you cause how hard would it be to go and grab a tape measurer and get those for you, but unfortunately i just primed my car and so the valance is not on it at the moment... sorry dude, maybe SOMEONE OUT THERE will give you a hand, just give it a bit of time. -Zach Quote Link to comment Share on other sites More sharing options...
Guest lan240 Posted April 16, 2003 Share Posted April 16, 2003 My air dam is 6 1/2 inches off the ground. It has been on the car for 2 months and have had no problems with it so far. Here is a link to a picture of my air dam. http://www.classiczcars.com/photopost/showphoto.php?photo=4036 Quote Link to comment Share on other sites More sharing options...
ZROSSA Posted April 17, 2003 Author Share Posted April 17, 2003 Not sure what / inchs is? I have measured it this afternoon. It is 13 inchs from the front of he radiator suport and 4.5 inchs of the ground. The front of my car is lowered but the back isnt so it will come up a little when done. Can someone get back to me so I can compare. Cheers Douglas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.