Datsun660z Posted March 29, 2002 Share Posted March 29, 2002 Ok this is what I need to ask. I am changing from the stealth intake to a Holley street dominator single plane intake for (hopefully) more horse power. and at the same time I am going to delete the valve cover breathers (to messy for me) and go with a PCV but I can't remember where at the carb it hooks up. (Holley 3310-s 750cfm) So My Question is What do I hook this dohicky hose thingy to? Thank You Jon Peterson SBC 406 = Datsun 660-Z Quote Link to comment Share on other sites More sharing options...
Guest greimann Posted March 29, 2002 Share Posted March 29, 2002 On the passenger side of the carb, on the lower plate, adjacent to the secondaries, there is a 3/8" hose barb. Hook it up there. Be aware, that if it was capped off before, it now will throw your idle off quite a bit. Quote Link to comment Share on other sites More sharing options...
Datsun660z Posted March 29, 2002 Author Share Posted March 29, 2002 Wow that was FAST, Thank you. Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted March 29, 2002 Share Posted March 29, 2002 Also check and make sure its working right after installing it. A REAL high percentage of NEW PCV valves leak and give a vacuum leak of pretty massive proportions. Just something to check, yes mine was defective and I've heard from lots of other people saying the same thing. Good luck with it. Regards, Lone Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.