peej410 Posted May 18, 2003 Share Posted May 18, 2003 alright im pretty sure that my stock distribution block is routed wrong, im trying to put all new hard lines in after stripping the engine bay and underbody of my Z could someone tell me the order of which line goes where from the distribution block on the inner driverside fender of a 72 240? i did a bunch of searching and i read through all my manuals but i cant just find a diagram. looking at the way my block is setup and where the previous owner ran the lines it looks like he mixed up the one for the rear brakes and one of the front brakes, a year ago i crashed my Z partially due to my own negligence and partially due to the fact that my Z pulled hard right when stomping on the brakes even though neither caliper was frozen. if anyone could help me id appreciate it very much, thanks in advance - pete Quote Link to comment Share on other sites More sharing options...
dmanzo57 Posted May 19, 2003 Share Posted May 19, 2003 Pete, Here's how they are routed on my '72... - Front port of Master to bottom rear of dist block - Top rear of dist block to rear brakes - Rear port of Master to bottom front of dist block - Top front and front of dist block to front brakes Don Quote Link to comment Share on other sites More sharing options...
peej410 Posted May 19, 2003 Author Share Posted May 19, 2003 alright ill go check it in the morning im way too tired right now.. thanks very much !!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.