Caliper hang over hub #'s for JSK Wilwood brake system

[Guest Anonymous]

Hey guys its Juan. My site is down cause of some billing errors. I changed my credit card number and guess they weren't able to bill me for the month. It will be fixed by Monday.

Alright I thought I would share some numbers for those interested in the adapter system. I was asked to do this from someone who was interested but just didn't want to have problems fitting his 16" Panasport rims without wheel spacing. Okay the outside mounting point from the stock caliper spindle to the wheel mounting side of the hub is 3.50 inches. Now you must add .25 for the Wilwood caliper bracket that I will be adding so you have now 3.75. From that number subtract the Caliper of your choice from the inner side mount to outside of caliper. That will give you your caliper over hub hang over.

 

Hang over for calipers below are

Superlit3 - .67" or 17.018mm

Billet 6 - .765" or 19.431mm

Billet 6 wide- .505" or 12.827mm

Billet ST- .545" or 13.843mm

Billet NDL- .315" or 8mm

 

Thank you and I hope this information will be helpful in more than 1 way.

Juan

[Guest 350zgto]

Thank you Juan for your help to resolve my Panasport caliper clearance questions with the Wilwood setup. This really helps out the guys that do not run the front wheel drive type offset wheels. I am mailing you a money order tomorrow.