ecp48 Posted October 4, 2003 Share Posted October 4, 2003 Anyone heard of a SW13, Caliper from the 4Runner or Toyota 4wd V6 Pickup? I have talked with a seller on eBay and it appears that it might be the successor to the S12W, for use with a ventilated disk, 84 300ZX rotor. Can anyone confirm this? the seller says he is not a mechanic, but he acquired them from a Z owner. Thanks in advance for your assistance. ecp48 Ed Palmer Quote Link to comment Share on other sites More sharing options...
280Zone Posted October 4, 2003 Share Posted October 4, 2003 http://www.zcar.com/articles/dat74z/brakes/ Quote Link to comment Share on other sites More sharing options...
brokebolt Posted October 4, 2003 Share Posted October 4, 2003 Yes look at the article, but to answer your question...Direct bolt on using vented rotors and rotor spacer. Same as S12W EXCEPT it is phisically larger, has larger pistons (1mm diameter if I recall) and uses similiar pad. If you use the S13WB pads you will need to grind off the inboard wear sensor. This sensor is nothing more than a section of steal that protruds out and has a rivited spring metal to touch the rotor when the pads wear down and make the noise we have all heard...SSQQQUUEEEEELLLL. If you use the S12W pads, they fit without mods. Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.