Guest Looking for apt in Alb Ny Posted November 15, 2003 Share Posted November 15, 2003 Quote Link to comment Share on other sites More sharing options...
280Zen Posted November 18, 2003 Share Posted November 18, 2003 Which injectors would work with this rail for a stock 83 280zx NA application? Quote Link to comment Share on other sites More sharing options...
mobythevan Posted November 18, 2003 Share Posted November 18, 2003 Your O-ring fuel rails are based of 1G DSM injectors right? But a person should be able to use just about any o-ring injector. My spreadsheet of obscure facts says that typical o-ring injectors use a bore of 14mm. The length of the injector and connector location may vary. But if its a side feed injector with 14mm o-ring (assuming the JSK rail uses 14mm) then worst case you only have to re-work you mounting method for the fuel rail so it sets higher. Does that sound right. Quote Link to comment Share on other sites More sharing options...
280Zen Posted November 18, 2003 Share Posted November 18, 2003 Hmm, I have a fuel rail that takes 10mm Oring injectors Quote Link to comment Share on other sites More sharing options...
mobythevan Posted November 18, 2003 Share Posted November 18, 2003 You just had to go and do that didn't you, now I have to update the spreadsheet Well, anyway the standard o-ring size is 14mm used by Bosch, Lucas, etc... I don't know how many other sizes exist, but hopefully the jsk rail is based on 14mm, that would make injector selection easier. Quote Link to comment Share on other sites More sharing options...
280Zen Posted November 18, 2003 Share Posted November 18, 2003 Yea I know, but I got this rail for a good price sometime back on Ebay, Hate to let it go to waste. If I remember correctly the seller had planned on using it with Nippon Denso 460cc injectors Which is way more than I need right now, Quote Link to comment Share on other sites More sharing options...
Guest Looking for apt in Alb Ny Posted November 26, 2003 Share Posted November 26, 2003 Hello Sorry it took me a while to respond. http://www.jskinnovations.com/fuelrail.htm . I have photos there and some example injectors that work with the rail. The rail is based on some turbo eclipse injectors from a 1990. The bore is .433 or roughly 11mm . I have to fix the pictures they are very large .Sorry about that. Juan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.