rear sway bar need help!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Guest lamar32]

I have 2 rear sway bars and, I can't either one to work I have the suspension techniques bar that mounts to control arms, and the motor sport bar that mounts to the floor board behind the seat. o.k. lets start with the motorsport bar I have a 3" exhaust and the bar hits it. Now on the suspension techniques bar I mounted over the axle and it hits the axle and under the axle and it just didn't look right and I don't the supplied endlinks would of worked. can someone post some pics or explain to me what I doing wrong. I have to fix it tommorrow.

[CruxGNZ]

Now on the suspension techniques bar I mounted over the axle and it hits the axle and under the axle and it just didn't look right and I don't the supplied endlinks would of worked. can someone post some pics or explain to me what I doing wrong. I have to fix it tommorrow.

 

With the Suspension Techniques bar, it mounts underneath the half shaft, or axle as you have called it. People have had interference issues only when they go to CV's. You should be fine if you still have the stock, u-jointed half shafts. Try using the supplied end links, if they don't work, you can cut the sleeve down to make the endlinks shorter. If you don't want to cut things, you can order different size endlinks from Jegs. They don't come up on thier online catalog, but trust me they have them. Call 'em 1-800-345-4545.

 

Also, make sure you don't have Suspension Techniques bar upside down.

 

!M!