Need some measurements for my 1972 240z, Frame rail replacem

[Guest Aguyandaredhead]

Ok, anybody have the FSM that includes the dimensions for all points on the chassis? I am in need of the location from 3 points to the pass side TC pocket hole. What I am after is the measurements from 3 fixed points on the car to the hole in the TC pocket, with that I should be able to relocate it onto the new frame rail I am installing. If you have a drawing that shows multiple fixed points on the car and can help me out I would appreciate it.. Thanks alot in advance..

 

Jeff

[srgunz]

I have a drawing scanned from my 72 FSM. Do not know how to attach it though.

[zxgts-4]

Jeff

Ive got a chassis drawing in PDF format that I can email if you let me know email address. Neil

[Guest Aguyandaredhead]

That would be great guys, You can just email them to me at the following address...Just be sure to remove the nospam part from the address. I hate spam. I really appreciate it I am going to try and tackle this this weekend..

 

Jeffhillhouse@tulsanospamcoxmail.com

 

Thanks

Jeff

[iaconsultants]

I have a 240Z that is upside down right now, I can try to take some pictures and place a ruler so you can get some ideas. Let me know and I will try to do this in the next few days since I will be out there working on taking that car apart the rest of the way and dump the remains.

Robert

[zxgts-4]

Hi Jeff

got email away tonight takes about 90 seconds at 56K let us know if any problems, Neil

[Guest Aguyandaredhead]

Thanks guys I got the drawing from 2 of you and I think it is what I needed.. Now if I just get the new framerail from Charlie (Zedfindings) this week I can get a start on it.. I am chomping at the bit to get started on my cage and I need to finish this first..

 

Thanks again

Jeff