front and rear control arm bushing

[Guest datsun280zmike]

do i take the metal sleeves out of the arms in the front control arms to push the urethane bushings in? its a energy suspension kit

thanks

[CruxGNZ]

Yes.

 

The only place you do not remove the sleeves for the Energy Suspension kit is the mustache bar.

 

!M!

[ecp48]

datsun280Zmike,

 

This is another one of those times you have to disregard the instructions.

 

When I did mine (also 280Z) six months ago, I called energy's tech support and got a "really". I suggested that they update the instructions, but obviously it hasnt happened.

 

Mat73GNZ is right on point. The only shell to leave is the moustache bar.

 

ecp48

[Guest datsun280zmike]

thanks guys...i figured that because the bushing was the same size as the inner sleeve but i just wanted to make sure...thanks again guys...now what about the tc bushings? should i just throw out the urethane and op for the stock rubber...i know its posted somewhere on here but theres so many combinations people are using so its hard to get a straight answer..or should i jus use the urethanes

mike

[CruxGNZ]

Use new stock rubber bushings for the T/C rod. If you feel you must use the urethane, then please look to this thread for more information.

Click Here

 

!M!