badjuju Posted February 6, 2005 Share Posted February 6, 2005 I'm at suspension.com, (http://www.suspension.com/nissancars.htm) and looking to get new bushings for my 'new' 81 zxturbo. I was just going to order a set of each across the board for the 79-83 zx, when I noticed that it says to measure the diameter of the sway bar before ordering. Being the lazy teenager I am (and the fact that it's 4:00 and I'm still not out of my bath robe) I thought I would post here and ask about it instead. It's the stock sway bar, whats its diameter? Quote Link to comment Share on other sites More sharing options...
jt1 Posted February 7, 2005 Share Posted February 7, 2005 You should measure yours to be sure. If you ordered and received the wrong size because you were too lazy to measure what's on your car, you would feel like a real dumbass. John Quote Link to comment Share on other sites More sharing options...
badjuju Posted February 7, 2005 Author Share Posted February 7, 2005 Point taken. Thanks, just thought it might be standardized stock. Quote Link to comment Share on other sites More sharing options...
Dan Juday Posted February 7, 2005 Share Posted February 7, 2005 Same thing here. I was sure my car had the original bar so that's what I told the guy. Then I measured it. Nope, previous owner had up-sized. Now get off your lazy butt! (j.k.) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.