Kraker_Jax Posted September 3, 2005 Share Posted September 3, 2005 Alright, it's time for my baby to shine!!! Now I have a few quick questions on building it. Here's the key. Now I understand that there should be say a 1/8" gap between the piece thats being put in and the board. What I don't understand is where the .6" bend is. Is that how much I bend next to the piece? Or at the end of the wire? Like in this picture... Say I bent the .6" off the end. This doesn't look right to me... So I'm guessing I bend the .6" from right next to the piece, solder it in on the bottom, and cut off the excess? Just trying to make sure all this before I start going at it. Thanks for the help guys!!! Quote Link to comment Share on other sites More sharing options...
dmanzo57 Posted September 3, 2005 Share Posted September 3, 2005 The .6" is the spacing between the holes in the board. You want the spacing between the resistor leads, after they are bent, to be .6" as well. Don Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.