Jump to content
HybridZ

My 1st project update


Recommended Posts

Well, I finally got the first stage of my project done, which was getting the garage all setup and tearing apart and cutting up my old project to fund this one. Old project is finally cut up and some of the parts have sold, so I'm finally starting to get some funds for the Z project. I purchased a '70 240Z about a month ago for $600. It hasn't ran in 10 years and it has a bit of rust, but it still looked better than everything else I looked at for under a grand. It also has a 5spd tranny in it, and it came with a bunch of extra parts, including and extra 4spd tranny and an extra r180 diff. I figure after I sell all the extra parts I'm not gonna need, I should be pretty close to even on the purchase of the car. On to the pics.

 

DVC00288.jpg

 

 

Its got a fairly decent scrape on the driver's fender and door.

DVC00289.jpg

 

The driver's side rocker(passenger side is about half as bad)

DVC00290.jpg

 

Bottom of one of the fenders

DVC00291.jpg

 

And now it's finally in the garage ready to get worked on. :-D

DVC00293.jpg

 

 

So the next stage I have planned is to start stripping her down and see just how bad the rust is. The rockers are pretty scary looking, everything else I've seen so far doesn't look that bad. As long as there isn't too much rust that compromises structural intregrity, I'm gonna keep it. Anything structural gets fixed before the swap, anything cosmetic or surface rust will be treated to keep it from spreading and the damage can be fixed at a later date after the swap is done. I don't want to end up with a flawless beatiful looking Z-shell that sits in my garage for years on end. im on a limited budget and getting it running under it's own LS-1 power is priority number 1. :-D I'll post some more pics after I get it more stripped down and can take some better pics of how bad the rust spots are.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...