Guest tony78_280z Posted May 3, 2006 Share Posted May 3, 2006 I'm hoping that someone can post or point me in the direction of some good photos of the rear control arms with new bushings installed so I can determine which size bushings go where on the control arms. Thanks Quote Link to comment Share on other sites More sharing options...
COZY Z COLE Posted May 3, 2006 Share Posted May 3, 2006 I'll try and point you in the right direction... http://www.atlanticz.ca/zclub/techtips/suspension.htm The 8 outer bushings have 3062 stamped on them and their 4 sleeves are 3/4"OD X 1.83" . 2 on each sleeve. You have 4 inner bushings stamped 3077 and 4 stamped 3078. 2 sleeves are 1-3/16" OD x 2.45". 2 sleeves are 1-3/16" OD x 2.062". 2 of the 3077 bushings go on one side of the control arm and 2 of the 3078 go on the other side. Match the sleeve and bushings up to the lenght of the control arm you are installing the bushings on.Hope this helps.... LARRY Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.