Guest Bluebird240sx Posted August 21, 2009 Share Posted August 21, 2009 Alright i have the same problem i think as some of the others in the posts... I have everything hooked up and everything should be installed correctly i had the wiring done at a shop and the injectors arnt opening, we checked the fuel and pulled the entire rail off and gas will come out the end of the rail but not hte injectors, i have spark i have air, everything is new except the fuel injectors and as far as i can tell its the only reason why it wont start, anybody have any ideas, also we checked the signal going to the injectors wich is supoesed to be a pulse signal and is a constant steady signal to the injectors (not sure if that will change anything) so if you know anything let me know its stressin me out, drift night is tomorrow. Quote Link to comment Share on other sites More sharing options...
logr Posted August 28, 2009 Share Posted August 28, 2009 A common mistake is to put fuel into the return line instead of the pressure line. The return line is the one coming out of the regulator. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.