mikesz Posted October 15, 2006 Share Posted October 15, 2006 Hello all....This is my first post on hybridz and no i am not new to z's.I am not getting much help on zcar.com and need some answers. I have searched and searched on here and still can't figure out the wiring for the turbo harness.I am putting an 83 l28et motor in my 1980 280zx n/a.The wiring by the battery is confusing me.I know white and yellow wires aren't used (i think) and there is a green blue- red wire and black-white.Do i just spade connect the two wires together? And now the coil wiring.Bleach explained to me through some very helpful emails about the wiring and i pretty much did what he told me to do.I wired the + n/a and neg n/a wiring from my coil to the + - on the turbo coil.Then wired the transistor back to prong five on the ignition plug by the ecu. The other tranistor wire is suppost to be grounded.As bleach mentioned.How do i ground the wire?I am getting more and more confused with all of this and need some quick answers. I will take some pics tomorrow and post the wiring locations i mentioned. Any help would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Yoak Posted October 16, 2006 Share Posted October 16, 2006 It simply needs to be grounded to the body of the car, or on the manifold. Make sure it has a good connection. I have an 83 ZXT engine in my 240z, not to many wires that have to be done really, which is good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.