YeaJimi Posted November 18, 2006 Share Posted November 18, 2006 Hey I've got a 79 280zx. I recently aquired it and am in the process of taking all of the previous owners shoddy wiring out (alarm, stereo, power antenna, etc). Long story short on the way to hooking everything back up I am left with a crank but no start problem. I've gone down the testing senarios for the ignition system and get up testing the cranking voltage at the IC unit. My voltage drops from 12, precrank to around 7-8ish (Taken at the 2 wire plug) while cranking. In the schematic it illustrated 4 wires coming off of the distro but I only see the two that I unplug to test it. If anyone could shed some light on this subject it would be appreciated. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
YeaJimi Posted November 18, 2006 Author Share Posted November 18, 2006 On the schematic would this be the explaination to 4 wires going to the dist? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.