660Z Posted December 30, 2006 Share Posted December 30, 2006 I`m currently installing a solid rear and was using the stock wheel base of 91" (90.7) Those that have done the swap. What wheel base did you go with? My test tires are 27" and would probablly work but are real close to the front edge like a stock 240z already is. I`m thinking a wheel base of 92 or 92.5 would center the the tire in the wells. I`m leaving everything tackwelded for now until my slicks come in. I`m just interested in what others have come up with. Mark Quote Link to comment Share on other sites More sharing options...
jap tin Posted December 30, 2006 Share Posted December 30, 2006 91" on the back halfed car 94" on the tube chassis car Quote Link to comment Share on other sites More sharing options...
660Z Posted December 30, 2006 Author Share Posted December 30, 2006 Thanks for the info, I found an old posting of Dr. Hunt`s saying his is also set at 94 inches. At 91" wheelbase I have some clearance issues and shock issues that I think 94" would clear up, so I`ll shoot for that mesurment. Mark Quote Link to comment Share on other sites More sharing options...
boodlefoof Posted December 30, 2006 Share Posted December 30, 2006 93'' here. Quote Link to comment Share on other sites More sharing options...
Mike kZ Posted January 3, 2007 Share Posted January 3, 2007 Not sure what measurements I have, but I centered the tire in the wheel well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.