QWKDTSN Posted November 26, 2001 Share Posted November 26, 2001 but damn the difference between 4x100mm and 4x4 1/2"! It's really not much. It makes me wish that there was some way to reliably machine the holes on the wheels outward so I could use a set on my car Quote Link to comment Share on other sites More sharing options...
randy 77zt Posted November 26, 2001 Share Posted November 26, 2001 i have a set of 15x7 asc/mcclaren wheels from a special edition asc/mcclaren mustang laying around.thinking about taking them to stockton rim & wheel to see if the hole could be machined for nissan alloy wheel lug nuts like i use on my 81 zxt 15x6 wheels.wheels were made by oz-grey mesh with machined front.some of those cars had ugly orange mesh wheels.mustang is 4x4.25.you can order center line wheeels from summit drilled for z.i would like a set of 17" forgedline-not enough bucks though. Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted December 24, 2001 Share Posted December 24, 2001 the Fox Mustang wheels are 4 1/4 by 4, not 4 by 4.The difference is 1/4 overall, but 1/8 on each side of the circle. This is not much for sure, but still doesn't bolt up. Wish there was a reasonable way to mod this as there are millions of Mustang wheels available. Quote Link to comment Share on other sites More sharing options...
BLKMGK Posted December 24, 2001 Share Posted December 24, 2001 Go 5lug, ten tons of those mustang styled wheels will fit! I did this and the wheel selection is MUCH better! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.