Jump to content
HybridZ

Wiring stock ballast resistors?


ihatejoefitz

Recommended Posts

Find out which wire is common to all 6 resistors. It is most likely the heaviest gauge wire. To be sure that it is the common, use your meter and measure the resistance between the common, and each of the other smaller wires. The resistance should be the same from the common to each of the other wires.

 

Connect the common to you injector 12V, and then each of the other six wires to each injector individually. The rest of your schematic is correct.

Link to comment
Share on other sites

Find out which wire is common to all 6 resistors. It is most likely the heaviest gauge wire. To be sure that it is the common, use your meter and measure the resistance between the common, and each of the other smaller wires. The resistance should be the same from the common to each of the other wires.

 

Connect the common to you injector 12V, and then each of the other six wires to each injector individually. The rest of your schematic is correct.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...