onefast87 Posted October 4, 2007 Share Posted October 4, 2007 heys guys im on the market for a wideband and was wondering what you guys think of the AEM unit?? is anyone using one on there megasquirt?? heres what im looking at http://www.aempower.com/ViewCategory.aspx?CategoryID=67 http://cgi.ebay.com/ebaymotors/AEM-Uego-Wideband-o2-Controller-30-4100-Full-Kit_W0QQcmdZViewItemQQcategoryZ46100QQihZ003QQitemZ130158483285QQrdZ1QQsspagenameZWDVW let me know what you guys think im not very interested in the Innovate as everyone has one of them. Quote Link to comment Share on other sites More sharing options...
Slow_Old_Car Posted October 4, 2007 Share Posted October 4, 2007 I run a UEGO AEM unit on my car w/ a v2.2 board on 29q2 code. I went to the AEM unit after having a Innovative LM-1. There was nothing wrong w/ the LM-1, i just didn't need it's abilities for a permanent install in my car that interfaced with MSnS since the EMS could do all the logging and then some. I chose the AEM as opposed to switching to an LC-1 because i wanted a display for current AFR read outs that wouldn't require me to drive around w/ my laptop all the time. While the XD-16 upgrade is availble for the LC-1, at the time it was more cost effective to just go to the all in one setup of the AEM UEGO system. My only complaints about the AEM are that it comes in 2 & 1/16th when most Z's run 2 & 5/8ths gauges for the dash, and it seems to read a tenth off vs. the MegaSquirt when all the settings are correct. I've chalked it up to the MSnS software having a faster refresh rate than what the display on the UEGO has. Really it's fairly irrelivant in just glancing since i don't do any adjustments unless i'm going through a tune and datalog in megalog viewer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.